Raya Pharmaceuticals has experienced great progress in both product supplying and market presence. The product range covers Auto Hematology analyzer, Full Autochemistry analyzer, Semi Autochemistry analyzer, Ifant radiant warmer, Multi-Parameter patient monitor,Oxygen concentrator,Electrical suction unit, Oxygen regulator, Arm blood pressure monitor,Handheld Pulseoximeter, Reagents and chemicals, Diluent, Lyse, Probe-cleanser, Ez-cleanser, Diganostic test, H.pylori Ab, H.pylori Ag, Blood lancet, Elastic Bandage, Yellow tip, Blue tip, Centrifuge tube, EDTA tube,SST tube, Microscope Slide, Cover glass while market presence spreads across the whole of Ethiopia.
5-Diff Hematology Analyzer
Genrui KT-6610 is an innovative, economical, compact hematology analyzer using advanced tri-angle laser scattering, flow cytometry technology that can be applied for detecting the parameters of WBC, RBC, PLT, HGB, etc. 28 parameters, 8 research parameters and 2 histograms for RBC and PLT, 4 scattergrams for WBC differential) in whole blood or pre-diluted blood.
3-Diff Hematology KT-60
Genrui KT-60 is an up-to-date hematology analyzer providing smart counting mode for low-value samples with only 9μL whole blood required. RFID card closed system and wider linearity brings the real card closed system and more widely clinical application. It is a wise choice for the small and medium labs, clinics or hospitals which require cost-effective solutions by offering a complete solution with a built-in system and reliable clinical supports.
Fully-auto chemistry analyzers can help in the whole process for calibration, QC, adding sample, adding reagent, mixing, temperature control, timing incubation, calculation results, dilution and retest, data transmission, cleaning, maintenance, etc. Using spectrophotometry and translucent turbidimetry, basically covering all conventional biochemistry experimental items.
GS100 is the smallest and most integrated chemistry analyzer, which is perfect for low-volume laboratories.
GS300 Plus is one of the best bench-top chemistry analyzers, which is flexible for small to medium-sized laboratories. By utilizing the latest innovations, it's a perfect combination of a small footprint and outstanding performance.
The GS480A is a robust and fully-auto of chemistry analyzer. The instrument is designed especially for middle-to-large laboratories. With its high throughput of 400T/H constantly, it can easily support the daily chemistry testing work for samples quantity about 200 and more.
Semi-automatic chemistry analyzer, as a means of basic testing, has largely satisfied the extensive basic medical construction in some underdeveloped markets due to its lower cost and less time and manpower input. The mainly-used products are wp21a and wp21b. If you want to know more about the semi auto chemistry analyzer price, please contact us.
WP21A is a NEW generation semi-auto chemistry analyzer, it is one of the best models in the same series. The compact analyzer integrates incubators and timers. The large color touch screen and the intuitive software make it more user-friendly. The innovative WP21A brings a better user experience for small laboratories and makes their daily job much easier.
WP21B was born to be a simple solution that helps small laboratory to fulfill their chemistry analysis program.
The NWS warmers provide radiant warmth to treat infants suffering from severe heat loss. It is suitable for all environments, from labour rooms to neonatal ICUs. It provides quality care at affordable cost.
The NWS 101 is backed with by the many years of experience of PHOENIX has in designing and supplying sophisticated neonatal care equipment worldwide.
The Phoenix NWS 101 comes with an option of an attached bed or choosing a bassinet of your choice.
The multiparameter monitors are designed to give number of information on one screen and hence provides multiple information that is needed to understand the patient condition. It has emerged as a monitor to offer flexible solution for varying critical care need.
Multi-parameter patient monitors (MPMs) [1] are widely used in intensive care units (ICUs) and general wards to continuously monitor patients’ health based on the following human vital parameters: heart rate; blood pressure; respiration rate; and oxygen saturation (SPO2).
The usage is in Emergency, Operation Room and ICU Capable of monitoring ECG, SPO2, Non Invasive Blood Pressure (NIBP), Respiration Rate and Temperature.
An oxygen concentrator is a device that concentrates the oxygen from a gas supply (typically ambient air) by selectively removing nitrogen to supply an oxygen-enriched product gas stream. They are used industrially and as medical devices for oxygen therapy.
Two methods in common use are pressure swing adsorption and membrane gas separation. Pressure swing adsorption (PSA) concentrators utilize multiple molecular sieves consisting of zeolite minerals that adsorbs pressurized nitrogen in fast cycles.
A suction machine, also known as an aspirator, is a type of medical device that is primarily used for removing obstructions — like mucus, saliva, blood, or secretions — from a person’s airway. When an individual is unable to clear secretions due to a lack of consciousness or an ongoing medical procedure, suction machines help them breathe by maintaining a clear airway.
Medical oxygen regulators are precision devices which control oxygen pressures up to 2,000 and even 3,000 psig (per square inch gauge) and regulate this pressure to allow patients to receive the proper prescription of oxygen. Oxygen Conserving Devices and Regulators are pressure reducing devices designed to regulate or lower oxygen pressure from a cylinder to levels that can be safely used by the patient. A Regulator simply regulates the (free) flow from an oxygen cylinder.
Oxygen regulators come in different sizes and styles, so that they can fit the range of oxygen cylinders and delivery systems available. Some are compact enough to fit in the palm of your hand, while others are appropriate large oxygen delivery systems. Both pediatric and adult models are available.
Blood pressure is measured using a sphygmomanometer, or blood pressure monitor. It consists of an inflatable cuff that’s wrapped around your arm, roughly level with your heart, and a monitoring device that measures the cuff’s pressure.
The monitor measures two pressures: systolic, and diastolic. Systolic pressure is higher, occurring when your heart beats and pushes blood through the arteries, and diastolic pressure is measured when your heart is resting and filling with blood. So, for example, your blood pressure might be 120 over 80.
Handheld Pulse Oximeters (or "SATs monitors" as they are sometimes known) are still one of the most popular methods of obtaining pulse oximetry measurements. A separate reusable sensor on the end of a length of cable is clipped onto the finger and the other end is plugged into the handheld oxygen saturation monitor. This handset contains all the electronics, power supply and display screen.
This method allows the "Pulse Ox" to be used with different types of compatible sensor; giving the user a choice of reusable or disposable sensors, as well as a choice of different sites including the earlobe, hand, foot, finger or toe.
There’s also a lot more room inside the device (compared with a Fingertip Pulse Oximeter) which allows the manufacturers to incorporate other functions, such as audible alarms, data storage memory and rechargeable batteries.
Pressure Activated Safety Blood Lancet are single-use devices for capillary blood sampling dedicated to healthcare professionals. Safety design protects users from needle-stick injury, risk of infection for both patient and operators were eliminated.
Pipette tips are used with pipettes and pipettors to speed processing and reduce cross-contamination. They are available in a variety of materials and styles. Popular pipette styles used are: Universal pipette tips, Filter pipette tips and Low retention pipette tips.
Centrifuge tubes are used to contain liquids during centrifugation, which separates the sample into its components by rapidly rotating it around a fixed axis.
Most centrifuge tubes have conical bottoms, which help collect any solid or heavier parts of the sample being centrifuged. Centrifuge tubes must also be able to withstand the centrifugal pressure created during their use, and their specifications may indicate the maximum speed at which they can be safely used.
This tube contains EDTA as an anticoagulant. These tubes are preferred for blood bank tests. NOTE: After the tube has been filled with blood, immediately invert the tube 8-10 times to mix and ensure adequate anticoagulation of the specimen.
This tube contains a clot activator and serum gel separator – used for various chemistry, serology, and immunology tests.
A microscope slide is a thin flat piece of glass, typically 75 by 26 mm (3 by 1 inches) and about 1 mm thick, used to hold objects for examination under a microscope. Typically the object is mounted (secured) on the slide, and then both are inserted together in the microscope for viewing. This arrangement allows several slide-mounted objects to be quickly inserted and removed from the microscope, labeled, transported, and stored in appropriate slide cases or folders etc.
Microscope slides are often used together with a cover slip or cover glass, a smaller and thinner sheet of glass that is placed over the specimen. Slides are held in place on the microscope's stage by slide clips, slide clamps or a cross-table which is used to achieve precise, remote movement of the slide upon the microscope's stage (such as in an automated/computer operated system, or where touching the slide with fingers is inappropriate either due to the risk of contamination or lack of precision).
Multi sample Needle is one type of Blood Collection Needle, made of stainless steel and plastic luer adapter, needle point is tri-bevel cut which minimize the pain while puncture into vein, it is use together with vacuum blood collection tube for blood collecting, sampling and tests in clinic and hospitals. Some region or country also name it as Vacutainer needle.
Embedding cassettes, strip holes, manufactured from P.O.M material, chemical resistance, special designed to hold histological specimen safely for treatment, embedding and storage
Buckle Tourniquet is made of latex-free elastic terylene with automatic release ABS buckle, use for fastening the vein to control blood flow in blood collecting process.
Freezing tube 1.8ml, manufactured from PP material for tube, PE material for Cap, Self-stand bottom, screw cap with O-ring, with graduation, with large white writing area, it is the ideal lab consumable for biological sample storage.
High transparency Test Tube 12x75mm, manufactured from medical grade PS material, high transparent, has a good chemical compatibility. Adapted to storage for most of polar organic solvent, weak acid, weak base.
Blood Collection tube is made of PET or Glass material, spray-coated with Sodium heparin in the Interior of the tube wall, it is widely used in blood collection for plasma separation and anticoagulation for clinical biochemical examinations, emergency biochemical tests and also some times for hemorrheology.
Cover Glass is a piece of very thin glass or plastic used to cover material on a microscope slide.
Plaster of Paris POP Bandage is used to make casts for immobilization following fractures. They are also used following surgery and orthopaedic corrections treating joint and bone conditions, thus aiding the healing process.
Plaster of Paris POP Bandage is used to make casts for immobilization following fractures. They are also used following surgery and orthopaedic corrections treating joint and bone conditions, thus aiding the healing process. Features. Fast setting time(2-5minutes) and excellent moulding; Reliable casting,smooth and neat outlook. less loss of plasterFeatures
Package
High Elastic Bandage is made of rubber combined with polyester or cotton combined with rubber and polyester material. It is used for a firm support of sprains or strains in knee, ankle, elbow and foot. Splint fixation and fixed joint protection. It provides strong compression.
Features
Zinc Oxide Adhesive Plaster Tape (with Metal Cover) is painted with adhesive, made of natural rubber and zinc oxide adhesive on weaving-cloth back lining. It is used in surgical operation, for the fastening of dressing or catheter, and in sports protection and labor protection as well.
Features
Package
with Metal cover, in box.
The H.pylori Antibody Test is a qualitative membrane based immunoassay for the detection of H.pylori antibodies in whole blood, serum or plasma. In this test procedure, anti-human IgG is immobilizied in the test line region of the test. After specimen is added to the specimen well of the device, it reacts with H.pylori antigen coated particles in the test. This mixture migrates chromatographically along the length of the test and interacts with the immobilized anti-human IgG. If the specimen contains H.pylori antibodies, a colored line will appear in the test line region indicating a positive result. If the specimen does not contain H.pylori antibodies, a colored line will not appear in this region indicating a negative result. To serve as a procedural control, a colored line will always appear in the control line region, indicating that proper volume of specimen has been added and membrane wicking has occurred.
H. pylori testing is used to detect the bacteria in the digestive tract, diagnose the infection, and to evaluate whether treatment has cured the infection.
A blood test, called an HCV antibody test, is used to find out if someone has ever been infected with the hepatitis C virus. The HCV antibody test, sometimes called the anti-HCV test, looks for antibodies to the hepatitis C virus in blood. Antibodies are chemicals released into the bloodstream when someone gets infected.
Test results can take anywhere from a few days to a few weeks to come back. Rapid anti-HCV tests are available in some health clinics and the results of these tests are available in 20 to 30 minutes.
Diluents are low-molecular-weight, low-viscosity compounds that are used to reduce the viscosity or enhance the solubility of a resin and/or hardener.
Diluents are low-molecular-weight, low-viscosity compounds that are used to reduce the viscosity or enhance the solubility of a resin and/or hardener. Diluents may be either reactive or non-reactive. However, the reactive types are more desirable since they combine chemically with the main resin during cure and are not free to outgas or leach, especially during thermal-vacuum exposure. Epoxy diluents, for example, are formulated together with epoxy resins to reduce the viscosity and still remain 100% solids. Normally, solvents would be used to reduce viscosity, but most organic solvents are now being disallowed because of their high volatile emissions. Some long-chain aliphatic reactive diluents can also improve the flexural strength of epoxy adhesives.
It is recommended that the electrodes be cleaned regularly with genrui Probe Cleaner solution. It is recommended that you clean your meter before calibrating or storing it. This will ensure that it operates with accuracy and precision once calibrated. Always keep your pH electrode stored in genuri pH Electrode Storage solution when not in use.
pH electrodes may show slow response due to the build up of organic and inorganic contaminants which coat or clog them. Regular cleaning with genuri Probe Cleaner solution can prolong
the life of your meter and maximise electrode performance. Genuri Probe Cleaner solution can also be used to remove contaminants from Conductivity meter electrodes, making this product a worthwhile investment.
EZ Cleaner is powered by an effective new detergent, which is an innovative complex blend containing the latest surfactant structures, and is a fully non-toxic, biodegradable detergent. The formulation does not contain any hazardous aldehydes or chlorine generating components. This new formulation is highly effective as a cleaner against bacteria, fungi and viruses. It is unique in that it helps to stop biofilm from forming, rather than just removing it once formed.
Chief Executive Officer (CEO)
Ashenafi Alle Babo
General Manager
Wondatir Abay Robso
June 18, 2022
We have moved to a new office! Raya keeps growing.
June 18, 2022
We imported new products,please vist us.
September 29, 2021
Raya participated At Clinical Lab Expo | AACC 2021.We use experience and profession to offer Medical Solutions for our clients!
